Magic Touch Advertising LLC
Call Us @ +971 4 2589895

DCT

dct45w

Features
bullet Water-release slide-off decal transfer paper for dark coloured, non-fabric, smooth surfaces.
bullet Suitable for glass, ceramics, metals, wax candles, soap, etc …
bullet Suitable for materials that cannot fit into a heat transfer press or cannot withstand heat.
bullet Newly developed DCT 4.5W meant for laser printers without fuser oil.
 
Specifications
Size A3 / A4
Quantity Per Box 50 / 100 Sheets
 
Special Instructions

bullet Clean surface of the product before transfer!
bullet Trim transfer to final shape/format.
bullet Place in cold water for about 30 seconds until transfer film releases from backing paper.
bullet Slide the image on the transfer film off the backing paper directly onto the product.
bullet Use Rubber Squeegee to squeeze out the water completely from underneath the transfer film by rubbing bullet Over the surface from the center to the sides.
bullet Let the transfer dry for at least 6 hours.
bullet The better you remove all excess water the better your final result.

The instructions written above are to give you a general guide on how to print using DCT. It doesn’t ensure that this set of operating instructions work with all kinds of products printed using DCT.

 

DCT Gallery

dct45c

Features
bullet Water-release slide-off decal transfer paper for dark coloured, non-fabric, smooth surfaces.
bullet Suitable for glass, ceramics, metals, wax candles, soap, etc …
bullet Suitable for materials that cannot fit into a heat transfer press or cannot withstand heat.
bullet Newly developed DCT 4.5W meant for laser printers without fuser oil.
 
Specifications
Size A3 / A4
Quantity Per Box 50 / 100 Sheets
 
Special Instructions

bullet Clean surface of the product before transfer!
bullet Trim transfer to final shape/format.
bullet Place in cold water for about 30 seconds until transfer film releases from backing paper.
bullet Slide the image on the transfer film off the backing paper directly onto the product.
bullet Use Rubber Squeegee to squeeze out the water completely from underneath the transfer film by rubbing bullet Over the surface from the center to the sides.
bullet Let the transfer dry for at least 6 hours.
bullet The better you remove all excess water the better your final result.

The instructions written above are to give you a general guide on how to print using DCT. It doesn’t ensure that this set of operating instructions work with all kinds of products printed using DCT.

 

DCT Gallery



 
© Copyright   Magic Touch Advertising LLC 2017.  All right reserved.